News

Stay up to date with Data Physics news.

May 2013
Web Seminar: Kinematic Transformation for Matrix Multishaker Control on Thursday, June 6, 2013

Register Kinematic Transformation can be very useful in multi degree of freedom (DOF) vibration testing. Kinematic Transformation uses rigid body kinematics to transform multiple measurements or drive signals to the rigid body translation and rotation degrees of freedom. This enables the transformation of an array of linear acceleration measurements to an equivalent set of rigid…
Read the Rest >

May 2013
Web Seminar: Modal Impact Testing with SignalCalc Analyzers on Thursday, May 30, 2013

Register Raman Sridharan, Applications Engineer, will introduce the basic concepts behind modal analysis. Topics include a practical introduction to modal testing, how to choose and use the correct impact hammer, important aspects of making accurate modal measurements, and book keeping and data management in modal testing. Raman Sridharan is an Applications Engineer at Data Physics…
Read the Rest >

May 2013
Data Physics Corporation Adds 60 kN Shaker to SignalForce Line of Electrodynamic Shakers

San Jose, California, May 9, 2013 – Data Physics Corporation today announced the release of the SignalForce model LE-1316-3/DSA10-100K Electrodynamic Shaker System, a shock and vibration test system that provides higher force and displacement capability in an air cooled package. Extending the force and displacement of the SignalForce air cooled shakers allows engineers to perform…
Read the Rest >

May 2013
Data Physics Recognized by NetSuite for 10 Years of Global Growth

  San Jose, California – May 2, 2013 – Data Physics Corporation was recently featured by NetSuite in a press release titled “Manufacturer of Industrial Sound and Vibration Testing Equipment Marks 10 Years of Global Growth on NetSuite.” Netsuite is a leading company in the market of cloud-based ERP (Enterprise Resource Planning) software solutions. The…
Read the Rest >

April 2013
Orbit- und Shaft-Centerline-Analyse an Turbomaschinen. Datum: Dienstag, 14. Mai 2013

Anmelden Schwingungsexperte Rob Bloomquist präsentiert die Analyse von Orbits und Shaft-Centerline von Turbomaschinen, am 14. Mai um 19 Uhr. Die Analyse von Orbits und Shaft-Centerline-Daten sind zwei Verfahren, die speziell bei großen, mit Gleitlagern ausgestatteten Turbomaschinen, angewendet werden. Dieses Webseminar konzentriert sich auf die Analyse und die Korrelation von Orbit- und Shaft-Centerline-Daten, welche wertvolle Einblicke…
Read the Rest >

April 2013
Video: Matrix regelt seismische Prüfungen mit sechs Freiheitsgraden an der Morgan State

Im September 2012 nahm die Morgan State University in ihrem 67 Mio-Dollar teueren “Center for the Built Environment of Infrastructure Studies (CBEIS)” ein biaxiales Vibrationsprüfsystem in Betrieb (wir hatten darüber berichtet unter: SignalStar Matrix Vibration Controller Runs Seismic Tests at Morgan State University). Im Frühjahr 2013 hat die Morgan State University nun den Schwingprüftisch und…
Read the Rest >

Older »
Distributor And Representative Working On Project Areospace