Data Physics Shakers and Controllers James Webb Telescope

Vibration Testing at NASA Goddard Continues

Last Updated on June 23, 2023 by dpnew

Vibration testing on the James Webb Space Telescope recently resumed at NASA’s Goddard Space Flight Center, in Greenbelt, Maryland. This testing is being performed on high-performance equipment provided by NVT Group members Team and Data Physics Corporations.

On December 3rd, 2016, vibration testing automatically shut down early due to sensor readings that exceeded predicted levels. After a thorough investigation, the James Webb Space Telescope team at NASA Goddard determined that the cause was extremely small motions of the numerous tie-downs or “launch restraint mechanisms” that keep one of the telescope’s mirror wings folded-up for launch.

The “soft shutdown” sequence built into the Team and Data Physics systems functioned exactly as designed – gently stopping the test within a fraction of a second of the alarm-level response measurements.  This soft shutdown functionality allows interlocks between the Team hardware, Data Physics shakers and amplifiers, and specific customer interlocks to initiate a soft shutdown to the Data Physics Matrix controller, which ramps the test down per the customer requirements.  More about this testing can be viewed on the NASA website – NASA JWST Website

Data Physics Shakers and Controllers James Webb Telescope

James Webb Space Telescope being loaded onto one of two Vibration Test Systems at the NASA Goddard Space Flight facility. Photo Credit: NASA/Chris Gunn

James Webb Test System TEAM Corporation Slip Table
James Webb Test System TEAM Corporation Slip Table
James Webb Test System TEAM Corporation Slip Table