News
Stay up to date with Data Physics news.
May 2013
Web Seminar: Kinematic Transformation for Matrix Multishaker Control on Thursday, June 6, 2013
Register Kinematic Transformation can be very useful in multi degree of freedom (DOF) vibration testing. Kinematic Transformation uses rigid body kinematics to transform multiple measurements or drive signals to the rigid body translation and rotation degrees of freedom. This enables the transformation of an array of linear acceleration measurements to an equivalent set of rigid…
Read the Rest >
May 2013
Web Seminar: Modal Impact Testing with SignalCalc Analyzers on Thursday, May 30, 2013
Register Raman Sridharan, Applications Engineer, will introduce the basic concepts behind modal analysis. Topics include a practical introduction to modal testing, how to choose and use the correct impact hammer, important aspects of making accurate modal measurements, and book keeping and data management in modal testing. Raman Sridharan is an Applications Engineer at Data Physics…
Read the Rest >
May 2013
Data Physics Corporation Adds 60 kN Shaker to SignalForce Line of Electrodynamic Shakers
San Jose, California, May 9, 2013 – Data Physics Corporation today announced the release of the SignalForce model LE-1316-3/DSA10-100K Electrodynamic Shaker System, a shock and vibration test system that provides higher force and displacement capability in an air cooled package. Extending the force and displacement of the SignalForce air cooled shakers allows engineers to perform…
Read the Rest >
May 2013
Data Physics Recognized by NetSuite for 10 Years of Global Growth
San Jose, California – May 2, 2013 – Data Physics Corporation was recently featured by NetSuite in a press release titled “Manufacturer of Industrial Sound and Vibration Testing Equipment Marks 10 Years of Global Growth on NetSuite.” Netsuite is a leading company in the market of cloud-based ERP (Enterprise Resource Planning) software solutions. The press…
Read the Rest >
April 2013
Web Seminar: Orbit and Shaft Centerline Analysis on Turbomachinery on Tuesday, May 14, 2013
Register Vibration analysis expert Rob Bloomquist will present Orbit and Shaft Centerline Analysis on Turbomachinery, on May 14 at 10 am PT. Analysis of orbits and shaft centerline data are two aspects of vibration analysis unique to large turbomachinery with fluid-film bearing supports. This web seminar will focus on analysis and correlation of orbit and…
Read the Rest >
April 2013
Video: Data Physics SignalStar Matrix Runs Six Degree of Freedom Seismic Tests at Morgan State
Last September, Morgan State University commissioned a biaxial seismic vibration test system at their $67-million Center for the Built Environment of Infrastructure Studies, or CBEIS (see SignalStar Matrix Vibration Controller Runs Seismic Tests at Morgan State University). However in early 2013 Morgan State University upgraded their shaker table and controller to a six degree of…
Read the Rest >
Links - Links to Us
Copyright Data Physics Corporation 2013- Terms of Use - Glossary
